The medical equipment/medical product listed below is owned and sold by: This web site is powered by MEDmarketplace.com  
  Dr's Toy Store
Hallandale Beach, FL 33009
 
 
MISSION STATEMENT Dr’s toy store is a top private owned and operated company with a large showroom which is well outfitted with a variety of medical equipment. Our company is proud of maintaining a wide inventory and well knowledgeable personnel with over 15 yrs of medical experience. In addition, to better meet our customer’s needs, we have a major on-site repair facility. All work is performed by highly trained and skilled technicians and all equipment is set to factory built specifications. Dr’s toy store has earned the reputation of being one the most respected and dependable supplier of medical equipment currently in the country. Our mission is to offer the absolute best price, service and selection on medical equipments and supplies.
 
     
   
 
Click on image
to enlarge




Product Name Listing Number Price
VALLEYLAB FORCE 2 ESU 314450 $3,200.00
Description
VALLEYLAB FORCE 2 ESU $3,200 OBO Product Description The Force 2 electrosurgical unit from Valleylab provides cutting and coagulation in monopolar or bipolar outputs. Force 2s have audible and visual alarms, including REM™ Fault Indicator. The REM™ (Return Electrode Monitoring) is standard. 300 watts is available for output in the cut setting. A monopolar foot switch is included, a bipolar foot switch is optional as is a rolling cart. FEATURES BLENDED CUT MODES Provide flexibility through varying degrees of hemostasis. Choose one of three preset modes. SIMULTANEOUS INDEPENDENT COAGULATION Permits two surgeons to fulgurate from a single generator, for added convenience and efficacy. Accessories are activated only when keyed, reducing the potential for injury caused by inadvertent activation. LOW VOLTAGE COAGULATION Ensures controlled, precise desiccation with less destruction of peripheral tissue, making the Forceª 2 generator ideal for laparoscopic procedures. REM™ SAFETY Is guaranteed with Valleylab's patented adaptive REMª system, which continually monitors patient impedance levels. If a fault in the patient/return electrode contact is detected, the REMª system automatically deactivates the generator virtually eliminating the risk of burns under the return electrode. Valleylab REMª safety has been proven in more than 100 million surgical procedures worldwide. SPECIFICATIONS WEIGHT AND DIMENSIONS * Height: 8 in. (20 cm) * Width: 13 in. (33 cm) * Length: 21 in. (53 cm) * Weight: 23 lbs. (10.4 kg) OUTPUT WAVEFORMS * Cut: 510 kHz sinusoid * Blend 1: 510 kHz sinusoidal bursts at 50% duty cycle recurring at 31 kHz * Blend 2: 510 kHz sinusoidal bursts at 37.5% duty cycle recurring at 31 kHz * Blend 3: 510 kHz sinusoidal bursts at 25% duty cycle recurring at 31 kHz * Coag: 510 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz Low Voltage 510 kHz sinusoidal bursts at 25% * Coag: duty cycle recurring at 31 kHz * Bipolar: 510 kHz sinusoid Output power changes by less than 5% or 5 watts, whichever is greater, as the line voltage varies from 85-135 volts (into a 300 ohm load). LOW FREQUENCY LEAKAGE (50-60 Hz) Source current, patient leads, all outputs tied together. * Normal polarity, intact chassis ground < 10 µA * Normal polarity, ground open <100 µA * Reverse polarity, ground open <100 µA * Sink current, 140V applied, all inputs <150 µA HIGH FREQUENCY LEAKAGE Less than 150 mA rms INPUT POWER REQUIREMENTS Operating range is 85 to 135 AC volts. Current is less than 8 amperes in cut and less than 4 amperes in coag. POWER READOUTS Agree with actual power into rated load to within ± 15% or 5 watts, whichever is greater. ADAPTIVE REM™ SYSTEM * Measurement Frequency: 140 kHz ± 20 kHz * Measurement Current: 3 mA maximum * Acceptable Resistance Ranges: --REMª pad Ñ 5-135 ohms --Non-REMª pad Ñ less than 20 ohms * Acceptance range is 5-135 ohms after REMª PolyHesiveª II return electrode is applied. REMª trip is initial impedance plus 40%. For example, if the initial impedance is 30 ohms, the upper level trip is approximately 42 ohms. COOLING Convection, no fan AUDIO VOLUME The mode indicator tones are adjustable to a minimum level of 45 dB at 1 meter. The alarm tones are not adjustable and are set at 65 dB minimum at 1 meter. Also available in a 220-240 volt, 50-60 Hz configuration. Designed to meet UL and CSA specifications. INCLUDES GROUNDING PLATE AND FOOT PEDAL THIS UNIT HAS BEEN EVALUATED AND IS IN GREAT WORKING CONDIITON. WE ALSO BUY, TRADE, REPAIR, AND EXPORT MEDICAL EQUIPMENT
Condition Quantity Available Date Available
1 AUG 26,2010
Manufacturer Model Number Model Year
Serial Number Inventory Number SKU Number
Shipping Product Location Location Zip Code
We ship worldwide! $50.00 UPS Ground See more services See shipping discounts | See all shipping details Estimated delivery within 4-9 business days.
Return Policy
NO RETURNS ACCEPTED
Acceptable Payment Types
The Doctor's Toy Store accepts credit cards, cashier checks and wire transfers for transactions within the United States. Any transactions outside the country must be paid by wire transfer only. All payments must be verified and cleared before any products are shipped.
Terms and Conditions

Home | Terms of Service | Privacy Policy | Our Sellers | Payment Solutions | Shipping Solutions
Media Center | Advertise with Us | MEDdealer | About Us | Contact Us

© 2002-2012 MEDmarketplace.com, Inc. All rights reserved.
The world's largest online marketplace for selling medical equipment, medical supplies, medical products, and hospital equipment.
    Bookmark and Share