Alarms

System Alarm Functions:
Brief alarm test at power turn-on, alarm for no determination and a continuous alarm for microprocessor failure. Audible
alarms with diagnostic codes displayed in pulse rate window for system failure.
Patient Alarm Functions:
Systolic: Preset at 30 mmHg low and 180 mmHg high
Diastolic: Preset at 15 mmHg low and 130 mmHg high
MAP:
Preset at 50 mmHg low and 140 mmHg high for adult/pediatric and neonate
Pulse Rate:
Preset at 40 BPM low and 160 BPM high
SpO2 Alarm Limits:
Preset at off (100%) high and 90% low.
Range: High 51-100% (100% = off)
Low 50-99%
Alarm Indicators:
LED with audio alarm silence key. LED only flashes if audio alarm silenced and an alarm condition exists. Diagnostic data
indicated on LCD.

Trend

Prior Data:
Monitor stores 24 hours of data; up to 100 readings within time period.

Environmental

Operating Temperatures:
+41°F to +104°F (+5°C to +40°C)
Atmospheric Pressure:
700 to 1060 hPa
Storage Temperature:
-4°F to +122°F (-20°C to +50°C)
Humidity:
0 to 95% noncondensing

Power Requirements

Input Power:
AC input voltage: 100-240 VAC, 50/60 Hz (nominal) 90-253 VAC, 47-63 Hz (range), 50VA. DC input voltage: 24 VDC, 36VA,
supplied from a source conforming to IEC 601-1.
Fuse:
AC input is protected by two internal fuses. DC input line is protected by an internal auto-resetting fuse. Battery: 12 volt, 2.3
amp-hours protected by internal auto-resetting fuse.
Battery:
Sealed lead acid 12 volt 2.3 amp-hour, minimum operation time of 2 hours (5-minute auto cycle with adult cuff,
temperature, SpO2 continuous and printer activated. Longer battery life with vital signs at less frequent intervals). Time for
full recharge is 2 hours from full discharge with monitor switched off.
Low Battery Warning:
Flashing LED and audio tone alert user of low battery condition.
Power Cable:
Domestic: 10-ft, detachable, gray-jacketed, 16-gauge terminated with 3-prong hospital grade plug.
International: 7.5-ft (2.3m), detachable, black jacketed, 16-gauge terminated with appropriate plug.

**IVAC® Temperature (PRO 200 & PRO 400 only)

Scale:
°Fahrenheit(F) °Celsius(C)
RangePredictive mode:
Max: 42.2° C; 108.0°
Min: 31.6° C; 88.9° F
Monitor Mode:
Max: 42.2° C; 108.0° F
Min: 26.7° C; 80.0° F
Monitor Mode Accuracy:
±0.1°C ±0.2°F (when tested in a calibrated liquid bath; meets ASTM E1112, Table 1, in range specified)
Predictive Mode Accuracy:
±1.0°F ±0.6°C Determination time less than 60 seconds

Use only IVAC probes and probe covers. The size, shape, and thermal characteristics of the probe covers can affect the performance of the instrument. Inaccurate readings or retention problems may occur unless IVAC probes and probe covers are used.
**IVAC is a trademark of Alaris Medical, Inc.

*NELLCOR™ Pulse Oximetry (SpO2) (PRO 300 & PRO 400 only)

Accuracy (± 1 Standard Deviation):
Adult/neonate 70 - 100% ±3.0 digits; under 70% unspecified
Saturation Range:
0 - 100%
Pulse Rate Range:
20 - 250 BPM
Pulse Rate Accuracy:
SpO2, ±3 BPM
Saturation Pitch:
Pitch changes with saturation. Volume selectable from off to 9.

*NELLCOR is a trademark of Mallinckrodt, Inc.

Physical Dimensions

Dimensions:
9.8 in (H) x 9.8 in (W) x 6.9 in (D)
24.8 cm (H) x 24.8 cm (W) x 17.5 cm (D)
Weight:
7.8 pounds; 3.5 kg (including battery)
Mountings:
Self-supporting on rubber feet. Pole mountable. Carrying handle recessed into top of monitor.
Portability:
Can be hand-carried by the recessed handle. When attached to the 3215 Rolling Stand, the monitor and accessories can
be wheeled from patient to patient.

Printer

Paper Width:
1.75 inches
Writing Method:
Direct thermal
Paper
Environmental requirements:
Temperature: 100°F (38°C) maximum
Humidity: 80% maximum