Conmed Bard 5000 Specifications

Output Characteristic         Frequency for all modes is 500KHz
Mode  Power (typical)   P/P Voltage (maximum open circuit)
Cut  350 W 500Ohm   2000V
Cut Blend 1.5  320 W 500Ohm  3600V
Coag Pinpoint  130 W 500Ohm  4000V
Coag Spray  75 W 500Ohm   8000V
Cut Bipolar   50 W 125Ohm    550 V
Coag Bipolar   50W 125Ohm  1280V

 
Input Characteristics  Maximum control setting into ohm load
Model 132030, 132036  Models 132031, 132033, 132034, 132035
115 VAC 60 Hz   220/240 VAC 50 Hz
Idle: 0.6 A   Idle: 0.3 A
Cut: 12 A  Cut: 6 A
Coag: 6 A   Coag: 3A

 
Risk Currents  R.F. high frequency   
Mode   Patient to Ground  Active to Ground
Cut Pure  100 ma   100 ma
Coag Pinpoint  70 ma  70 ma
Coag Spray   125 ma  120 ma
Coag Bipolar  105 ma  95 ma
Coag Bipolar  95 ma  90 ma
General
Dimensions  8”H x 18”W x 19”D (20 cm x 46 cm x 49 cm)
Weight   43 lbs (19 kg)
Internal Design  Solid State
Cooling   Convection (No Fan)
Output Configurations  RF Floating (Isolated)